Skip to content

Kerlink IOT Station Guide


Go to the address and download the correct file for the server you have been assigned. Also, make sure your gateway now has internet access otherwise after installing, the packet forwarder won't be able to connect to the ResIOT server.


Plug the flash drive into the gateway and wait for 5 minutes. During this time, the gateway will reboot. At the end of the process the packet forwarder will be installed and running over your gateway.


Once finished, in order to prevent cyclic reboots, a .log file is created at the root of the USB drive used for the installation. Delete the file if you want to perform the install process all over again.